# # Copyright (C) 2013 eNovance SAS # # Author: Emilien Macchi # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. # # == Class: ironic # # Installs the ironic package and configures /etc/ironic/ironic.conf # # === Parameters: # # [*enabled*] # (required) Whether or not to enable the ironic service # true/false # # [*package_ensure*] # (optional) The state of the package # Defaults to 'present' # # [*host*] # (optional) Name of this node. # Defaults to $facts['os_service_default']. # # [*my_ip*] # (optional) IP address of this host. # If unset, will determine the IP programmatically. If unable to do so, will use # "127.0.0.1". # Defaults to $facts['os_service_default']. # # [*my_ipv6*] # (optional) IP address of this host using IPv6. # Defaults to $facts['os_service_default']. # # [*auth_strategy*] # (optional) Default protocol to use when connecting to glance # Defaults to 'keystone'. # # [*default_resource_class*] # (optional) Default resource class to use for new nodes when no resource # class is explicitly requested. # Defaults to $facts['os_service_default'] # # [*executor_thread_pool_size*] # (optional) Size of executor thread pool when executor is threading or eventlet. # Defaults to $facts['os_service_default']. # # [*rpc_response_timeout*] # (optional) Seconds to wait for a response from a call. (integer value) # Defaults to $facts['os_service_default']. # # [*rpc_transport*] # (optional) Defines a remote procedure call transport between conductor and # API processes, such as using a messaging broker or JSON RPC. # Defaults to $facts['os_service_default'] # # [*control_exchange*] # (optional) What RPC queue/exchange to use (string value) # Defaults to $facts['os_service_default'] # # [*default_transport_url*] # (optional) A URL representing the messaging driver to use and its full # configuration. Transport URLs take the form: # transport://user:pass@host1:port[,hostN:portN]/virtual_host # Defaults to $facts['os_service_default'] # # [*rabbit_use_ssl*] # (optional) Connect over SSL for RabbitMQ. (boolean value) # Defaults to $facts['os_service_default'] # # [*rabbit_ha_queues*] # (optional) Use HA queues in RabbitMQ. (boolean value) # Defaults to $facts['os_service_default'] # # [*rabbit_heartbeat_timeout_threshold*] # (optional) Number of seconds after which the RabbitMQ broker is considered # down if the heartbeat keepalive fails. Any value >0 enables heartbeats. # Heartbeating helps to ensure the TCP connection to RabbitMQ isn't silently # closed, resulting in missed or lost messages from the queue. # Requires kombu >= 3.0.7 and amqp >= 1.4.0. (integer value) # Defaults to $facts['os_service_default'] # # [*rabbit_heartbeat_rate*] # (optional) How often during the rabbit_heartbeat_timeout_threshold period # to check the heartbeat on RabbitMQ connection. # i.e. rabbit_heartbeat_rate=2 when rabbit_heartbeat_timeout_threshold=60, # the heartbeat will be checked every 30 seconds. (integer value) # Defaults to $facts['os_service_default'] # # [*rabbit_qos_prefetch_count*] # (Optional) Specifies the number of messages to prefetch. # Defaults to $facts['os_service_default'] # # [*rabbit_quorum_queue*] # (Optional) Use quorum queues in RabbitMQ. # Defaults to $facts['os_service_default'] # # [*rabbit_transient_quorum_queue*] # (Optional) Use quorum queues for transients queues in RabbitMQ. # Defaults to $facts['os_service_default'] # # [*rabbit_transient_queues_ttl*] # (Optional) Positive integer representing duration in seconds for # queue TTL (x-expires). Queues which are unused for the duration # of the TTL are automatically deleted. # The parameter affects only reply and fanout queues. (integer value) # Min to 1 # Defaults to $facts['os_service_default'] # # [*rabbit_quorum_delivery_limit*] # (Optional) Each time a message is rdelivered to a consumer, a counter is # incremented. Once the redelivery count exceeds the delivery limit # the message gets dropped or dead-lettered. # Defaults to $facts['os_service_default'] # # [*rabbit_quorum_max_memory_length*] # (Optional) Limit the number of messages in the quorum queue. # Defaults to $facts['os_service_default'] # # [*rabbit_quorum_max_memory_bytes*] # (Optional) Limit the number of memory bytes used by the quorum queue. # Defaults to $facts['os_service_default'] # # [*rabbit_use_queue_manager*] # (Optional) Should we use consistant queue names or random ones. # Defaults to $facts['os_service_default'] # # [*rabbit_stream_fanout*] # (Optional) Use stream queues in RabbitMQ (x-queue-type: stream). # Defaults to $facts['os_service_default'] # # [*rabbit_enable_cancel_on_failover*] # (Optional) Enable x-cancel-on-ha-failover flag so that rabbitmq server will # cancel and notify consumers when queue is down. # Defaults to $facts['os_service_default'] # # [*kombu_ssl_ca_certs*] # (optional) SSL certification authority file (valid only if SSL enabled). # (string value) # Defaults to $facts['os_service_default'] # # [*kombu_ssl_certfile*] # (optional) SSL cert file (valid only if SSL enabled). (string value) # Defaults to $facts['os_service_default'] # # [*kombu_ssl_keyfile*] # (optional) SSL key file (valid only if SSL enabled). (string value) # Defaults to $facts['os_service_default'] # # [*kombu_ssl_version*] # (optional) SSL version to use (valid only if SSL enabled). # Valid values are TLSv1, SSLv23 and SSLv3. SSLv2 may be # available on some distributions. (string value) # Defaults to $facts['os_service_default'] # # [*kombu_reconnect_delay*] # (optional) How long to wait before reconnecting in response to an AMQP # consumer cancel notification. (floating point value) # Defaults to $facts['os_service_default'] # # [*kombu_failover_strategy*] # (Optional) Determines how the next RabbitMQ node is chosen in case the one # we are currently connected to becomes unavailable. Takes effect only if # more than one RabbitMQ node is provided in config. (string value) # Defaults to $facts['os_service_default'] # # [*kombu_compression*] # (optional) Possible values are: gzip, bz2. If not set compression will not # be used. This option may notbe available in future versions. EXPERIMENTAL. # (string value) # Defaults to $facts['os_service_default'] # # [*amqp_durable_queues*] # (optional) Define queues as "durable" to rabbitmq. (boolean value) # Defaults to $facts['os_service_default'] # # [*amqp_auto_delete*] # (Optional) Define if transient queues should be auto-deleted (boolean value) # Defaults to $facts['os_service_default'] # # [*sync_db*] # Enable dbsync # Defaults to true # # [*db_online_data_migrations*] # (optional) Run online_data_migrations - required on upgrade. # Defaults to false. # # [*purge_config*] # (optional) Whether to set only the specified config options # in the ironic config. # Defaults to false. # # [*notification_transport_url*] # (Optional) A URL representing the messaging driver to use for notifications # and its full configuration. Transport URLs take the form: # transport://user:pass@host1:port[,hostN:portN]/virtual_host # Defaults to $facts['os_service_default'] # # [*notification_driver*] # (Optional) Driver or drivers to handle sending notifications. # Value can be a string or a list. # Defaults to $facts['os_service_default'] # # [*notification_topics*] # (Optional) AMQP topic used for OpenStack notifications # Defaults to $facts['os_service_default'] # # [*notification_retry*] # (Optional) The maximum number of attempts to re-sent a notification # message, which failed to be delivered due to a recoverable error. # Defaults to $facts['os_service_default']. # # [*notification_level*] # (optional) Notification level for outgoing notifications # Defaults to $facts['os_service_default'] # # [*versioned_notifications_topics*] # (optional) Topics for the versioned notifications issued by Ironic # Defaults to $facts['os_service_default'] # # [*rbac_service_role_elevated_access*] # (optional) Enable elevated access for users with service role belonging # to the 'rbac_service_project_name' project when using the default policy. # Defaults to $facts['os_service_default'] # # [*rbac_service_project_name*] # (optional) The project name utilized for Role Based Access Control checks # for the reserved `service` project. # Defaults to 'services' # class ironic ( Boolean $enabled = true, Stdlib::Ensure::Package $package_ensure = 'present', $host = $facts['os_service_default'], $my_ip = $facts['os_service_default'], $my_ipv6 = $facts['os_service_default'], Enum['noauth', 'keystone', 'http_basic'] $auth_strategy = 'keystone', $default_resource_class = $facts['os_service_default'], $control_exchange = $facts['os_service_default'], $executor_thread_pool_size = $facts['os_service_default'], $rpc_response_timeout = $facts['os_service_default'], $rpc_transport = $facts['os_service_default'], $default_transport_url = $facts['os_service_default'], $rabbit_use_ssl = $facts['os_service_default'], $rabbit_heartbeat_timeout_threshold = $facts['os_service_default'], $rabbit_heartbeat_rate = $facts['os_service_default'], $rabbit_qos_prefetch_count = $facts['os_service_default'], $rabbit_ha_queues = $facts['os_service_default'], $rabbit_quorum_queue = $facts['os_service_default'], $rabbit_transient_quorum_queue = $facts['os_service_default'], $rabbit_transient_queues_ttl = $facts['os_service_default'], $rabbit_quorum_delivery_limit = $facts['os_service_default'], $rabbit_quorum_max_memory_length = $facts['os_service_default'], $rabbit_quorum_max_memory_bytes = $facts['os_service_default'], $rabbit_use_queue_manager = $facts['os_service_default'], $rabbit_stream_fanout = $facts['os_service_default'], $rabbit_enable_cancel_on_failover = $facts['os_service_default'], $kombu_ssl_ca_certs = $facts['os_service_default'], $kombu_ssl_certfile = $facts['os_service_default'], $kombu_ssl_keyfile = $facts['os_service_default'], $kombu_ssl_version = $facts['os_service_default'], $kombu_reconnect_delay = $facts['os_service_default'], $kombu_failover_strategy = $facts['os_service_default'], $kombu_compression = $facts['os_service_default'], $amqp_durable_queues = $facts['os_service_default'], $amqp_auto_delete = $facts['os_service_default'], Boolean $sync_db = true, Boolean $db_online_data_migrations = false, Boolean $purge_config = false, $notification_transport_url = $facts['os_service_default'], $notification_driver = $facts['os_service_default'], $notification_topics = $facts['os_service_default'], $notification_retry = $facts['os_service_default'], $notification_level = $facts['os_service_default'], $versioned_notifications_topics = $facts['os_service_default'], $rbac_service_role_elevated_access = $facts['os_service_default'], $rbac_service_project_name = 'services', ) { include ironic::deps include ironic::db include ironic::params include ironic::glance include ironic::neutron ensure_resource( 'package', 'ironic-common', { ensure => $package_ensure, name => $ironic::params::common_package_name, tag => ['openstack', 'ironic-package'], }) resources { 'ironic_config': purge => $purge_config, } ironic_config { 'DEFAULT/auth_strategy': value => $auth_strategy; 'DEFAULT/host': value => $host; 'DEFAULT/my_ip': value => $my_ip; 'DEFAULT/my_ipv6': value => $my_ipv6; 'DEFAULT/default_resource_class': value => $default_resource_class; 'DEFAULT/notification_level': value => $notification_level; 'DEFAULT/versioned_notifications_topics': value => $versioned_notifications_topics; 'DEFAULT/rpc_transport': value => $rpc_transport; 'DEFAULT/rbac_service_role_elevated_access': value => $rbac_service_role_elevated_access; 'DEFAULT/rbac_service_project_name': value => $rbac_service_project_name; } if $sync_db { include ironic::db::sync } if $db_online_data_migrations { include ironic::db::online_data_migrations } oslo::messaging::default { 'ironic_config': executor_thread_pool_size => $executor_thread_pool_size, transport_url => $default_transport_url, rpc_response_timeout => $rpc_response_timeout, control_exchange => $control_exchange, } oslo::messaging::rabbit { 'ironic_config': rabbit_use_ssl => $rabbit_use_ssl, heartbeat_timeout_threshold => $rabbit_heartbeat_timeout_threshold, heartbeat_rate => $rabbit_heartbeat_rate, rabbit_qos_prefetch_count => $rabbit_qos_prefetch_count, kombu_reconnect_delay => $kombu_reconnect_delay, kombu_failover_strategy => $kombu_failover_strategy, amqp_durable_queues => $amqp_durable_queues, amqp_auto_delete => $amqp_auto_delete, kombu_compression => $kombu_compression, kombu_ssl_ca_certs => $kombu_ssl_ca_certs, kombu_ssl_certfile => $kombu_ssl_certfile, kombu_ssl_keyfile => $kombu_ssl_keyfile, kombu_ssl_version => $kombu_ssl_version, rabbit_ha_queues => $rabbit_ha_queues, rabbit_quorum_queue => $rabbit_quorum_queue, rabbit_transient_quorum_queue => $rabbit_transient_quorum_queue, rabbit_transient_queues_ttl => $rabbit_transient_queues_ttl, rabbit_quorum_delivery_limit => $rabbit_quorum_delivery_limit, rabbit_quorum_max_memory_length => $rabbit_quorum_max_memory_length, rabbit_quorum_max_memory_bytes => $rabbit_quorum_max_memory_bytes, use_queue_manager => $rabbit_use_queue_manager, rabbit_stream_fanout => $rabbit_stream_fanout, enable_cancel_on_failover => $rabbit_enable_cancel_on_failover, } oslo::messaging::notifications { 'ironic_config': transport_url => $notification_transport_url, driver => $notification_driver, topics => $notification_topics, retry => $notification_retry, } }