deb-python-rtslib-fb/doc/saveconfig.json.5

.TH saveconfig.json 5
.SH NAME
.B saveconfig.json
\- Saved configuration file for rtslib-fb and LIO kernel target
.SH DESCRIPTION
.B /etc/target/saveconfig.json
is the default location for storing the configuration of the Linux
kernel target, also known as LIO. Since the target is in the kernel, tools like
.B targetctl
or
.B targetcli
must be used to save and restore the configuration across
reboots.
.P
Generating or modifying this file by hand, or with other tools, is also
supported. This fills a gap for users whose needs are not met by the
targetcli configuration shell, who cannot use the rtslib Python
library, and yet also wish to avoid directly manipulating LIO's
configfs interface.
.SH OVERVIEW
The configuration file is in the "json" text format, which is both
human- and machine-readable. Its format is very closely modeled on the
layout and terminology that LIO uses. Attributes may be string,
boolean, or numeric values. All sizes are expressed in bytes.
.SH LAYOUT
.SS TOP LEVEL SUMMARY
.B storage_objects
describes mappings of resources on the local machine that can be used
to emulate block devices.
.P
.B fabric_modules
describes settings for LIO fabrics -- the hardware or software
protocols that transport SCSI commands -- such as iSCSI or Fibre
Channel over Ethernet (FCoE).
.P
.B targets
describes the SCSI target endpoints that export storage objects over a
fabric.
.SS storage_objects
All storage objects must contain
.I name
and
.I plugin
values. Each name must be unique for all storage objects of its plugin
type.
.P
.I plugin
must be one of:
.IR fileio ,
.IR block ,
.IR pscsi ,
or
.IR ramdisk .
.P
Objects with plugin value of
.I fileio
must also contain
.IR dev ,
which is the full path to the file that is backing the storage object.
Optional
.I fileio
attributes are
.I wwn
(string),
.I write_back
(boolean), and
.I size
(number).
If the file given in
.I dev
does not exist, then
.I size
must be present, and a backing file of that size will be
created.
.P
Objects with plugin value of
.I block
must also contain
.IR dev ,
which is the full path to the block device that is backing the storage
object.
Optional
.I block
attributes are
.I wwn
(string),
.I write_back
(boolean), and
.I readonly
(boolean).
.P
Objects with plugin value of
.I pscsi
must also contain
.IR dev ,
which is the full path to the SCSI device that is backing the storage
object.
There are no optional attributes.
.P
Objects with plugin value of
.I ramdisk
must also contain
.IR size
(number), which is the size in bytes of the ramdisk.
Optional
.I ramdisk
attributes are
.I wwn
(string), and
.I nullio
(boolean).
.P
All storage object definitions may also contain an
.I attributes
object. This contains LIO attribute values, all of which are also
optional. Please see LIO documentation for more information on these.

.SS fabric_modules
This section is limited to setting discovery authentication settings
for fabrics that support it (currently just iscsi). Objects here
should contain
.IR name
(e.g. "iscsi"),
.IR userid ,
.IR password ,
.IR mutual_userid ,
and
.I mutual_password
string values.

.SS targets
Target configuration is modeled on iSCSI, in which a named target can
contain multiple sub-configurations called Target Port Groups
(TPGs). LIO follows this model for describing configuration even for
fabrics that do not support TPGs.
.P
Objects in
.I targets
contain just three attributes:
.I wwn
is the world-wide name the target has been given. This may start with
"iqn", or "naa", for example.
.I fabric
is the name of the fabric module this target is exported over. Allowed
values for this depend on the system configuration, but examples
include "iscsi", "loopback", and "tcm_fc".
.I tpgs
is a list of objects describing 1 or more TPGs, described below.

.SS tpgs
TPG object attributes are all optional. Values not supplied will be
set to default values.
.I tag
(number) allows the tpg tag to be specified.
.I enable
(bool, default to true) allows the TPG to be disabled or enabled.
.IR luns ,
.IR portals ,
and
.I node_acls
contain further lists of objects, descibed below.
Finally,
.IR userid ,
.IR password ,
.IR mutual_userid ,
and
.I mutual_password
allow main-phase authentication values to be set for fabrics (like
iSCSI) that support TPG-level authentication. (Please see
.IR targetcli (8)
for details on TPG versus ACL-based authentication.) Finally, TPGs can
also contain optional
.I attributes
and
.I parameters
lists, see LIO documentation for more information.

.SS luns
This list of objects maps storage objects to the TPG.
.I index
is a TPG-unique number for the assignment, which may be used as the LU
number for fabrics that do not support ACL mappings.
.I storage_object
is a string linking back to a storage object, of the format
"/backstores/<plugin>/<name>", where <plugin> and <name> correspond to
a storage object defined under
.IR storage_objects .

.SS portals
Portals describe connection endpoints for iSCSI targets. Required
values are
.I ip_address
(string) and
.I port
(number).
.I iser
(boolean) is an optional value to enable iSER.
.I offload
(boolean) is an optional value to enable hardware offload.

.SS node_acls
This contains information about explicit initiator LUN mappings.
.I node_wwn
(string) must be present.
Authentication may also be set on a per-ACL basis with
.IR userid ,
.IR password ,
.IR mutual_userid ,
and
.IR mutual_password,
similar to TPGs.
.I mapped_luns
is a list of mapped luns, described below.
Finally, node_acls can contain an optional
.I attributes
list.

.SS mapped_luns
Objects in
.I mapped_luns
contain three required attributes.
.I write_protect
(boolean) sets the write-protect status of the mapped LUN.
.I tpg_lun
(number) corresponds to an existing entry in the TPG's
.I luns
list.
.I index
is the LU number that the mapped LUN will claim.

.SH EXAMPLE CONFIGURATION
Since tools generate this file, one good way to understand its format
is to use a tool like
.B targetcli
to configure a target, then run
.BR saveconfig,
and view the resulting json file.
.SH SEE ALSO
.BR targetcli (8),
.BR targetctl (8)
.SH FILES
.B /etc/target/saveconfig.json
.SH AUTHOR
Man page written by Andy Grover <agrover@redhat.com>.
.SH REPORTING BUGS
Report bugs via <targetcli-fb-devel@lists.fedorahosted.org>
.br
or <https://github.com/open-iscsi/rtslib-fb/issues>